Solar Panel Cleaning in the NRV & Surrounding Areas
You didn't pay for solar panels. You paid for the electricity they make. Dirty ones quietly stop holding up their end of the deal.
Here's the uncomfortable math on solar: you spent real money so your panels would spend the next few decades paying you back in electricity. Then dust, pollen, bird droppings, and whatever the valley's trees are shedding this month settle onto the previously transparent surface, and every bit of that film is sunlight your panels aren't converting.
A dirty array can quietly shave a real slice off your output, and because the loss creeps in gradually, most people never notice they're leaving money on the roof.
How We Clean Them
Pure water, zero chemicals.
It's the same deionized water-fed pole system we use on windows: tap water run through a series of tanks that strip out the total dissolved solids (TDS), then rinsed across the panel so it dries spot-free. No soaps, no solvents, nothing that leaves a residue for the next layer of dust to cling to, and nothing that puts your panel coatings or your warranty at risk.
We never walk on your panels.
Foot traffic micro-cracks cells and voids most manufacturer warranties. Our carbon-fiber poles reach nearly 80 feet, so we clean from the roof edge or the ground and leave your array exactly as sound as we found it (except more sparkly, of course).
Angled glass sheds water, not grime.
The same tilt that sends rain running lets pollen and organic matter bake on in the sun. Rain is not a cleaning. We are.
Why It Pays for Itself
Cleaner glass means higher conversion efficiency, which means more of the power you already paid to generate. On a producing system, the recovered output from a good cleaning has a habit of covering the cost of the cleaning. It's about the cheapest efficiency upgrade your system will ever get.
Frequently Asked Questions
It all depends on their environment. Usually once or twice a year suits most NRV systems. Less if you're in the middle of a grassy low wind meadow, possibly more if you're under trees, near gravel roads, or close to farm dust. If yours look clean enough to skip, we'll absolutely give you this information.
Yes, and the dirtier they've gotten, the bigger the jump once they're clean. You're not adding capacity; you're stopping the leak. If yours look clean enough to skip though, we'll absolutely give you this information.
No. We clean entirely from poles, specifically to protect the cells and your warranty.
It's commonly the opposite risk. Abrasives, harsh chemicals, and foot traffic are what void warranties. Pure water off a soft brush is about the gentlest thing you can do to a panel. Usually manufacturers allow for cleaning without voiding the warranty. Honestly, it would be a pretty big red flag if they didn't. That said, it never hurts to double check. For the record, we've never ONCE damaged a panel.
Let's get your solar panels back to full strength.
